Cutthroat Rival 1 combines our sweet carbon Cutthroat frame and fork with the proven performance of a SRAM Rival 1 drivetrain. Whether you’re taking on the Tour Divide, exploring some new terrain, or just enjoying day out in familiar neck of the woods, Cutthroat Rival 1 is up to the task.
Frameset | |
---|---|
Frame | Cutthroat Carbon |
Fork | Cutthroat Carbon |
Color | Red/Blue |
Rear Shock | N/A |
Drivetrain | |
---|---|
Front Der | N/A |
Rear Der | SRAM Rival 1 |
Cassette | SRAM PG 1130, 11-42t |
Chain | SRAM PC 1110 |
Crankset | SRAM Stylo 7K Eagle DUB, 34t |
Shifter | SRAM Rival 1 HRD |
Brakes & Rotors | SRAM Rival HRD, 160mm rotors |
Components | |
---|---|
Headset | Cane Creek 40 |
Stem | Salsa Guide |
Handlebar | Salsa Cowchipper Deluxe |
Grips | MSW Anti-Slip Gel |
Seatpost | Salsa Guide Deluxe |
Saddle | WTB Volt Comp |
Wheels | |
---|---|
Front Wheel | DT Swiss C 1800 Spline 15 x 100mm |
Rear Wheel | DT Swiss C 1800 Spline 12 x 142mm |
Tires | Maxxis Ikon 2.2", 60 TPI/EXO/TR |
Weight | |
---|---|
Complete Bike Weight | MD - 22 lb 2 oz LG - 21 lb 6 oz XL - 22 lb 8 oz |
MSRP (USA) | |
---|---|
Complete Bike | $3,699 |
Component Sizing
Size | SM | MD | LG | XL |
---|---|---|---|---|
Stem Length | 70mm | 90mm | 90mm | 100mm |
Crank Length | 170mm | 170mm | 175mm | 175mm |
Handlebar Width | 40cm | 42cm | 44cm | 46cm |
Seatpost Offset | 18mm | 18mm | 18mm | 18mm |
Design Wheel/Tire Size | 29 x 2.4" max |
---|---|
Rigid fork Length | 483–486mm |
Suspension Fork Length (Travel) | 501–511mm (100mm) |
Fork Offset | 45mm |
Headset-Upper | ZS44 |
Headset-Lower | ZS56 |
Seatpost | 27.2mm |
Seat Collar | 32.0mm |
Front Derailleur Type | Compact 2x, top-pull only |
Front Derailleur Mount | High direct mount (26mm offset) |
Bottom Bracket | PressFit 41 x 92mm |
Crankset | 2x: 28/42t max standard mountain bike, 1x: 38t max standard mountain bike |
Rear Brake (Rotor) | 74mm post mount; (140 –160mm) |
Rear Spacing | 142 x 12mm thru-axle |
Rear Axle Size | 12 x 174L, TP = 1.5, TL = 12 |
Derailleur Hanger | 687 Hanger (FS2339). For installation instructions see 687 Derailleur Hanger Instructions on salsacycles.com/safety |
Bottle Mounts | SM = 2, MD–XL = 3 |
Accessory Mounts | 2 (1 on top of toptube, 1 under downtube) |
Stem Clamp | Ø28.6mm |
Crown Race | Ø40mm |
Front Brake (Rotor) | 74mm post mount; (160 –180mm) |
Front Spacing | 100 x 15mm thru-axle |
Front Thru-Axle | 15 x 125L, TP = 1.5, TL = 12 |
Bottle Mounts | 2 (3-Pack config) |
Size | SM | MD | LG | XL |
---|---|---|---|---|
Recommended Rider Height | 168–175cm | 173–183cm | 180–191cm | 188cm–UP |
A. Toptube Effective | 545.0mm | 565.0mm | 580.0mm | 600.0mm |
B. Seat Tube Length | 406mm | 482.6mm | 533mm | 584mm |
C. Headtube Angle | 70° | 70° | 71° | 71° |
D. Seat Tube Angle | 74° | 74° | 73° | 73° |
E. BB Drop | 70mm | 70mm | 70mm | 70mm |
F. Chainstay Length | 445mm | 445mm | 445mm | 445mm |
G. Headtube Length | 90mm | 115mm | 140mm | 160mm |
H. Fork Length | 483mm | 483mm | 483mm | 483mm |
J. Fork Offset | 45mm | 45mm | 45mm | 45mm |
K. Wheelbase | 1052.7mm | 1057.4mm | 1067.9mm | 1088.6mm |
M. Stack | 593.9mm | 619.5mm | 645.3mm | 664.2mm |
N. Reach | 374.7mm | 375.6mm | 382.7mm | 396.9mm |
P. Standover | 719.1mm | 787.1mm | 829.9mm | 868.7mm |
Measurements based on:
Salsa Cycles Limited Warranty
All Salsa products are warranted against manufacturing defects in materials and workmanship from the date of retail purchase of the product, subject to the limitations detailed below. Every Salsa frame, component, and apparel has a useful product life cycle. The length of that useful product life cycle will vary depending on the construction and the materials of the product, maintenance and care the product receives, and the amount and type of use the product is subjected to over its life. Your bike has an intended level of use as defined by the ASTM Riding Condition Classification Chart. Failure to adhere to the use cases identified in this chart will void your warranty. Save your dated receipt for proof of purchase.
NOTE: All warranty periods below apply to original owner only
Five-Year Warranty
Steel frames
Titanium frames
Carbon frames
Carbon front triangle of suspension frames
Three-Year Warranty
Aluminum frames
Aluminum front triangles of suspension frames
All Salsa forks
All Salsa components
Two-Year Warranty
Aluminum chainstays of suspension frames
Aluminum seatstays of suspension frames
Carbon seatstays of suspension frames
All other suspension frame parts (excludes hanger, pivot hardware, bearings)
One-Year Warranty
All apparel
All frame bags
Salsa Cycles does not guarantee the compatibility of original components with a warranty replacement frame. Salsa Cycles is not responsible for parts or labor required to remove and/or refit and re-adjust the product within the bicycle assembly, including wheel rebuilds.
Salsa Cycles cannot guarantee a color match to the original frame, component, or apparel in the event of a replacement.
This warranty applies to 2014 and newer model bicycles and covers only Salsa Cycles branded product. Any other original part or component shall be covered by the stated warranty of the original manufacturer. Any products not specifically included above are hereby excluded.
This warranty does not cover the following:
Damage due to improper assembly or follow-up maintenance or lack of skill, competence or experience of the user or assemble
Bicycles that were not assembled or serviced by an authorized Salsa Cycles dealer
Products that have been modified, neglected, used in competition, or for commercial purposes such as rental, courier, police, security, etc, misused or abused, involved in accidents or anything other than normal use
Installation of components, parts, or accessories not originally intended for use with or compatible with Salsa frames and components
Salsa Cycles bicycles, frames, components or softgoods purchased from an unauthorized dealer
Salsa Cycles bicycles, frames, components or softgoods purchased from third-party internet sites, including auction websites, and regional trading websites (examples: Amazon, eBay, and Craigslist) are not covered under this warranty, even if you have a receipt
Sandblasting, sanding, grinding, wire brushing, filing, welding, brazing, drilled holes, anodizing, refinishing, powder coating, or chrome plating the bicycle, frame, or component will void the warranty
Internal rust perforation on all steel frames
Wear, scratches, chips and cracks to paint, finish, or coating on all Salsa frames and components
Bent or broken derailleur hangers or Alternator plates
Labor required to remove and/or refit and re-adjust the product within the bicycle assembly, including wheel rebuilds
Damage to carbon fiber caused by any carbon assembly paste
Normal wear and tear
Legal Disclaimer
This limited warranty is expressly limited to the repair or replacement of a defective product, at the option of Salsa Cycles, and is the sole remedy of the warranty. This limited warranty applies only to the original purchaser of the Salsa Cycles product and is not transferable. This warranty applies only to Salsa Cycles products purchased through an authorized dealer or distributor. In no event shall Salsa Cycles be liable for any loss, inconvenience or damage, whether direct, incidental, consequential, or otherwise resulting from breach of any express or implied warranty or condition of merchantability, fitness for a particular purpose, or otherwise with respect to our products except as set forth herein. This warranty gives the consumer specific legal rights, and those rights and other rights may vary from place to place. This warranty does not affect your statutory rights.
TO THE EXTENT NOT PROHIBITED BY LAW, THESE WARRANTIES ARE EXCLUSIVE AND THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
For 2013 and older model bicycles and products, please consult your Owner’s Manual, Salsa Cycles product instructions, or contact Salsa Cycles or your authorized Salsa dealer for the applicable warranty information.
WARRANTY REGISTRATION:
Proof of purchase is required before a warranty claim is processed. Salsa Cycles therefore strongly encourages warranty registration at salsacycles.com. Failure to register will not affect consumer rights under the limited warranty stated above, so long as the consumer can show in a reasonable manner proof of original ownership and the date the Salsa Cycles product was purchased.
If you have any questions contact support@salsacycles.com
“…the Salsa Cutthroat held its fair share of surprises. Most unexpected was its versatility. It was the steep, technical climbs and attention demanding descents in the Sierra Maestra mountains where the Salsa Cutthroat revealed her greatest charms. I was expecting a bike that would leave me walking when the terrain got dicey; as I’ve found that to be the case for many drop bar adventure bikes, be them too fragile feeling or just not confidence inspiring. The Cutthroat, on the other hand, was able to dissect rocky tracks as well or better than many 29ers I’ve ridden.”
-Bikepacking.com - August 2017
“I need to point out that Salsa champions the drop bar off-road touring and racing bike. They love the hand positions, the unique stance and the options for drivetrains.”
-TheRadavist.com – June 2015
“Three days on the Tour Divide with the Salsa Cutthroat.”
-TheRadavist.com – June 2015
“There’s nothing like taking a brand new bike and throwing it into the proverbial fire.”
-TheRadavist.com – June 2015
“For an adventure mountain bike that’s primarily aimed at bikepacking, it'll be hard to find a better rig than the Cutthroat.”
-Outside Online – July 2015
“To make a long story short, I don’t think I’m ever going to pay money for a dedicated road bike, a gravel cyclocross bike, or a hardtail 29er mountain bike ever again. Instead, I’m just going to get a Cutthroat.”
-Singletracks.com – November 2015
“VIDEO REVIEW”
-PathLessPedaled.com - October 2018