Cutthroat GRX 810 1x is a mixed-surface missile ready to cover ground with speed and efficiency. Outlast everyone in the pack with the comfort and compliance of the redesigned full-carbon Cutthroat frame and fork and the precision performance of Shimano’s GRX 810 drivetrain. Cutthroat’s unique drop-bar mountain bike geometry delivers a stable ride no matter what’s under your tires.
Frameset | |
---|---|
Frame | Cutthroat Carbon V2 |
Fork | Cutthroat Carbon Deluxe V2 |
Color | Bright Green |
Rear Shock | n/a |
Drivetrain | |
---|---|
Front Der | n/a |
Rear Der | Shimano GRX 812 |
Cassette | Shimano M7000-11, 11-42t |
Chain | Shimano HG701-11 |
Crankset | Race Face Turbine w/ Race Face DM 36t chainring |
Shifter | Shimano GRX 810 Hydro |
Brakes & Rotors | Shimano GRX 810 Hydro, RT76 160 mm |
Components | |
---|---|
Headset | Cane Creek 40 |
Stem | Salsa Guide |
Handlebar | Salsa Cowchipper Deluxe |
Grips | MSW Anti-Slip Gel |
Seatpost | Salsa Guide Deluxe |
Saddle | WTB Volt Race |
Wheels | |
---|---|
Front Wheel | DT Swiss X 1900 Spline 15 x 110 mm |
Rear Wheel | DT Swiss X 1900 Spline 12 x 148 mm |
Tires | Teravail Sparwood 29 x 2.2" Durable, Tubeless Ready |
Weight | |
---|---|
Bike Weight | 21 lbs 10 oz for 58 cm |
Component Sizing
Size | 52cm | 54cm | 56cm | 58cm | 60cm |
---|---|---|---|---|---|
Stem Length | 60mm | 70mm | 80mm | 80mm | 90mm |
Crank Length | 170mm | 170mm | 175mm | 175mm | 175mm |
Handlebar Width | 40cm | 42cm | 44cm | 44cm | 46cm |
Seatpost Offset | 18mm | 18mm | 18mm | 18mm | 18mm |
Design Wheel x Tire Size | 29 x 2.25" (29 x 2.4" Max) |
---|---|
Susp Fork Length (Travel) | 506 mm (100 mm Travel) |
Rigid Fork Length | 483 mm |
Fork Offset | 51 mm |
Front Spacing | 110 x 15 mm Thru-axle |
Front Brake (Rotor) | Flat mount (160–180 mm), flat mount frame standard (35 mm thickness), 42 mm bolt length |
Front Rack Mounts | Yes, lowrider compatible. Salsa Down Under rack recommended. |
Fork Accessory Mounts | Yes, one set of Three-Pack mounts on each fork leg |
Headset, Upper | IS41 |
Headset, Lower | IS52 |
Seatpost | 27.2 mm |
Seat Collar | 32.0 mm |
Dropper Compatible (Routing) | Yes, internal |
Front Derailleur Type | Road, braze-on, 2x, bottom-pull |
Bottom Bracket | Press Fit BB92, 41 x 92 mm |
Crankset (Max & Min Ring) | 1x MTN Boost: 40t Max; 2x RD Boost outer ring: 46–50t, inner ring: 30–36t *Oval chainrings subtract 2t from max* |
Rear Brake (Rotor) | Flat mount (140–160 mm), flat mount frame standard (25mm Thickness), 32 mm bolt length |
Rear Spacing | 148 x 12 mm Thru-axle |
Rear Axle Size | Ø12 x 174, TP=1.5, TL=20 |
Derailleur Hanger | QBP #FS2322 |
Rear Rack Mounts | Yes, Salsa Rack Lock seatpost collar required. Salsa Wanderlust Rack recommended. Salsa Bent Rack Struts (part #RK8030) required for installation on 58 cm and 60 cm frames. Not compatible with Salsa Wanderlust HD Rack |
Rear Fender Mounts | n/a |
Water Bottle Mounts | Frames up to 54cm: 2 in main triangle. Frames 56cm and larger: 3 in main triangle. |
Under Downtube Mount | Yes, two pair. |
Top Tube Mounts | Yes, compatible with Salsa Top Tube bag. |
Internal Dropper Post Routing | 1x mechanical drivetrain: Route the dropper post cable through the drive side of the down tube. Di2 drivetrains: Move the battery to the down tube, routing it through the head tube, then route the dropper post cable through the drive side of the down tube. |
External Dropper Post Routing | 1x and 2x mechanical and Di2 drivetrains: Route the dropper post cable through the dynamo rear light holes on the non-drive side of the top tube. |
Size | 52cm | 54cm | 56cm | 58cm | 60cm |
---|---|---|---|---|---|
Recommended Rider Height | 154cm–168cm | 168cm–175cm | 173cm–185cm | 183cm–193cm | 190cm–UP |
A. Toptube Effective | 520.0mm | 540.0mm | 560.0mm | 580.0mm | 600.0mm |
B. Seat Tube Length | 355.6mm | 419.1mm | 508.0mm | 558.8mm | 584.2mm |
C. Headtube Angle | 69° | 69° | 69° | 69° | 69° |
D. Seat Tube Angle | 74.5° | 74.25° | 74.25° | 74° | 73.75° |
E. BB Drop | 70.0mm | 70.0mm | 70.0mm | 70.0mm | 70.0mm |
F. Chainstay Length | 445.0mm | 445.0mm | 445.0mm | 445.0mm | 445.0mm |
G. Headtube Length | 90.0mm | 98.0mm | 127.0mm | 154.0mm | 175.0mm |
H. Fork Length | 483.0mm | 483.0mm | 483.0mm | 483.0mm | 483.0mm |
J. Fork Offset | 51.0mm | 51.0mm | 51.0mm | 51.0mm | 51.0mm |
K. Wheelbase | 1049.54mm | 1067.55mm | 1090.31mm | 1109.83mm | 1128.6mm |
M. Stack | 584.98mm | 592.45mm | 619.53mm | 644.73mm | 664.34mm |
N. Reach | 357.77mm | 372.91mm | 385.28mm | 395.13mm | 406.36mm |
P. Standover | 700.44mm | 741.72mm | 810.51mm | 851.75mm | 874.22mm |
Measurements based on:
Salsa Cycles Limited Warranty
All Salsa products are warranted against manufacturing defects in materials and workmanship from the date of retail purchase of the product, subject to the limitations detailed below. Every Salsa frame, component, and apparel has a useful product life cycle. The length of that useful product life cycle will vary depending on the construction and the materials of the product, maintenance and care the product receives, and the amount and type of use the product is subjected to over its life. Your bike has an intended level of use as defined by the ASTM Riding Condition Classification Chart. Failure to adhere to the use cases identified in this chart will void your warranty. Save your dated receipt for proof of purchase.
NOTE: All warranty periods below apply to original owner only
Five-Year Warranty
Steel frames
Titanium frames
Carbon frames
Carbon front triangle of suspension frames
Three-Year Warranty
Aluminum frames
Aluminum front triangles of suspension frames
All Salsa forks
All Salsa components
Two-Year Warranty
Aluminum chainstays of suspension frames
Aluminum seatstays of suspension frames
Carbon seatstays of suspension frames
All other suspension frame parts (excludes hanger, pivot hardware, bearings)
One-Year Warranty
All apparel
All frame bags
Salsa Cycles does not guarantee the compatibility of original components with a warranty replacement frame. Salsa Cycles is not responsible for parts or labor required to remove and/or refit and re-adjust the product within the bicycle assembly, including wheel rebuilds.
Salsa Cycles cannot guarantee a color match to the original frame, component, or apparel in the event of a replacement.
This warranty applies to 2014 and newer model bicycles and covers only Salsa Cycles branded product. Any other original part or component shall be covered by the stated warranty of the original manufacturer. Any products not specifically included above are hereby excluded.
This warranty does not cover the following:
Damage due to improper assembly or follow-up maintenance or lack of skill, competence or experience of the user or assemble
Bicycles that were not assembled or serviced by an authorized Salsa Cycles dealer
Products that have been modified, neglected, used in competition, or for commercial purposes such as rental, courier, police, security, etc, misused or abused, involved in accidents or anything other than normal use
Installation of components, parts, or accessories not originally intended for use with or compatible with Salsa frames and components
Salsa Cycles bicycles, frames, components or softgoods purchased from an unauthorized dealer
Salsa Cycles bicycles, frames, components or softgoods purchased from third-party internet sites, including auction websites, and regional trading websites (examples: Amazon, eBay, and Craigslist) are not covered under this warranty, even if you have a receipt
Sandblasting, sanding, grinding, wire brushing, filing, welding, brazing, drilled holes, anodizing, refinishing, powder coating, or chrome plating the bicycle, frame, or component will void the warranty
Internal rust perforation on all steel frames
Wear, scratches, chips and cracks to paint, finish, or coating on all Salsa frames and components
Bent or broken derailleur hangers or Alternator plates
Labor required to remove and/or refit and re-adjust the product within the bicycle assembly, including wheel rebuilds
Damage to carbon fiber caused by any carbon assembly paste
Normal wear and tear
Legal Disclaimer
This limited warranty is expressly limited to the repair or replacement of a defective product, at the option of Salsa Cycles, and is the sole remedy of the warranty. This limited warranty applies only to the original purchaser of the Salsa Cycles product and is not transferable. This warranty applies only to Salsa Cycles products purchased through an authorized dealer or distributor. In no event shall Salsa Cycles be liable for any loss, inconvenience or damage, whether direct, incidental, consequential, or otherwise resulting from breach of any express or implied warranty or condition of merchantability, fitness for a particular purpose, or otherwise with respect to our products except as set forth herein. This warranty gives the consumer specific legal rights, and those rights and other rights may vary from place to place. This warranty does not affect your statutory rights.
TO THE EXTENT NOT PROHIBITED BY LAW, THESE WARRANTIES ARE EXCLUSIVE AND THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
For 2013 and older model bicycles and products, please consult your Owner’s Manual, Salsa Cycles product instructions, or contact Salsa Cycles or your authorized Salsa dealer for the applicable warranty information.
WARRANTY REGISTRATION:
Proof of purchase is required before a warranty claim is processed. Salsa Cycles therefore strongly encourages warranty registration at salsacycles.com. Failure to register will not affect consumer rights under the limited warranty stated above, so long as the consumer can show in a reasonable manner proof of original ownership and the date the Salsa Cycles product was purchased.
If you have any questions contact support@salsacycles.com