Frameset | |
---|---|
Frame | Spearfish Carbon |
Fork | Fox Float 32 SC 100mm |
Color | Raw Carbon |
Rear Shock | Fox Float DPS |
Drivetrain | |
---|---|
Front Der | N/A |
Rear Der | SRAM GX |
Cassette | SRAM XG 1150 10-42t |
Chain | KMC X11 |
Crankset | SRAM GX 1200, X-SYNC 32t |
Shifter | SRAM GX1 |
Brakes & Rotors | SRAM Guide R, Centerline 180mm |
Components | |
---|---|
Headset | Cane Creek 40 |
Stem | Salsa Guide |
Handlebar | Salsa Salt Flat 2 |
Grips | Salsa Backcountry Lock-On |
Seatpost | Zoom 31.6 x 350mm set-back post |
Saddle | WTB Volt Race |
Wheels | |
---|---|
Front Wheel | ROAM 30, 15 x 110mm thru-axle |
Rear Wheel | ROAM 30, 12 x 142mm thru-axle |
Tires | Schwalbe Racing Ralph 2.2 performance folding 29" |
Weight | |
---|---|
Complete Bike Weight | 24 lb 10 oz for Medium set up tubeless |
MSRP (USA) | |
---|---|
Complete Bike | $2,999 |
Component Sizing
Size | Small | Medium | Large | X-Large |
---|---|---|---|---|
Stem Length | 80mm | 90mm | 100mm | 110mm |
Crank Length | 170mm | 170mm | 175mm | 175mm |
Handlebar Width | 700mm | 750mm | 750mm | 750mm |
Seatpost Offset | 0mmmm | 0mmmm | 0mmmm | 0mmmm |
Design Wheel/Tire Size | 29 x 2.1–2.35" |
---|---|
Suspension Fork Length (Travel) | 501–511mm (100mm) |
Fork Offset | 51mm |
Rear Shock Size | 165 x 38mm (6.5 x 1.5") |
Forward Shock Mount | 8 x 22mm |
Rearward Shock Mount | 8 x 38mm |
Headset-Upper | ZS44 |
Headset-Lower | ZS56 |
Seatpost | 31.6mm |
Seat Collar | Carbon: 36.4mm, Alu: 35.0mm |
Front Derailleur Type | Compact 2x; top-pull only |
Front Derailleur Mount | High direct-mount (26mm offset) |
Bottom Bracket | PressFit 41 x 92mm |
Crankset | 2x: 36/24t max, standard mountain bike 1x: 34t max, standard mountain bike |
Rear Brake (Rotor) | 51mm standard (140–180mm) |
Rear Spacing | 142 x 12mm thru-axle |
Rear Axle Size | 12 x 182L, TP=1.75 TL=20 |
Derailleur Hanger | FS2322 |
Bottle Mounts | 1 per frame |
Size | Small | Medium | Large | X-Large |
---|---|---|---|---|
Recommended Rider Height | 168–175cm | 175–183cm | 183–190cm | 190cm–UP |
A. Toptube Effective | 580mm | 600mm | 620mm | 640mm |
B. Seat Tube Length | 407mm | 457mm | 508mm | 534mm |
C. Headtube Angle | 69.3° | 69.3° | 69.3° | 69.3° |
D. Seat Tube Angle | 73.5° | 73.5° | 73.5° | 73.5° |
E. BB Drop | 45mm | 45mm | 45mm | 45mm |
F. Chainstay Length | 437mm | 437mm | 437mm | 437mm |
G. Headtube Length | 100mm | 110mm | 120mm | 120mm |
H. Fork Length | 506mm | 506mm | 506mm | 506mm |
J. Fork Offset | 51mm | 51mm | 51mm | 51mm |
K. Wheelbase | 1101.4mm | 1121.4mm | 1142.2mm | 1162.9mm |
M. Stack | 597.4mm | 606.8mm | 616.8mm | 616.8mm |
N. Reach | 403.0mm | 420.3mm | 437.6mm | 457.5mm |
P. Standover | 725.0mm | 733.5mm | 755.1mm | 778.5mm |
Measurements based on:
Salsa Cycles Limited Warranty
All Salsa products are warranted against manufacturing defects in materials and workmanship from the date of retail purchase of the product, subject to the limitations detailed below. Every Salsa frame, component, and apparel has a useful product life cycle. The length of that useful product life cycle will vary depending on the construction and the materials of the product, maintenance and care the product receives, and the amount and type of use the product is subjected to over its life. Your bike has an intended level of use as defined by the ASTM Riding Condition Classification Chart. Failure to adhere to the use cases identified in this chart will void your warranty. Save your dated receipt for proof of purchase.
NOTE: All warranty periods below apply to original owner only
Five-Year Warranty
Steel frames
Titanium frames
Carbon frames
Carbon front triangle of suspension frames
Three-Year Warranty
Aluminum frames
Aluminum front triangles of suspension frames
All Salsa forks
All Salsa components
Two-Year Warranty
Aluminum chainstays of suspension frames
Aluminum seatstays of suspension frames
Carbon seatstays of suspension frames
All other suspension frame parts (excludes hanger, pivot hardware, bearings)
One-Year Warranty
All apparel
All frame bags
Salsa Cycles does not guarantee the compatibility of original components with a warranty replacement frame. Salsa Cycles is not responsible for parts or labor required to remove and/or refit and re-adjust the product within the bicycle assembly, including wheel rebuilds.
Salsa Cycles cannot guarantee a color match to the original frame, component, or apparel in the event of a replacement.
This warranty applies to 2014 and newer model bicycles and covers only Salsa Cycles branded product. Any other original part or component shall be covered by the stated warranty of the original manufacturer. Any products not specifically included above are hereby excluded.
This warranty does not cover the following:
Damage due to improper assembly or follow-up maintenance or lack of skill, competence or experience of the user or assemble
Bicycles that were not assembled or serviced by an authorized Salsa Cycles dealer
Products that have been modified, neglected, used in competition, or for commercial purposes such as rental, courier, police, security, etc, misused or abused, involved in accidents or anything other than normal use
Installation of components, parts, or accessories not originally intended for use with or compatible with Salsa frames and components
Salsa Cycles bicycles, frames, components or softgoods purchased from an unauthorized dealer
Salsa Cycles bicycles, frames, components or softgoods purchased from third-party internet sites, including auction websites, and regional trading websites (examples: Amazon, eBay, and Craigslist) are not covered under this warranty, even if you have a receipt
Sandblasting, sanding, grinding, wire brushing, filing, welding, brazing, drilled holes, anodizing, refinishing, powder coating, or chrome plating the bicycle, frame, or component will void the warranty
Internal rust perforation on all steel frames
Wear, scratches, chips and cracks to paint, finish, or coating on all Salsa frames and components
Bent or broken derailleur hangers or Alternator plates
Labor required to remove and/or refit and re-adjust the product within the bicycle assembly, including wheel rebuilds
Damage to carbon fiber caused by any carbon assembly paste
Normal wear and tear
Legal Disclaimer
This limited warranty is expressly limited to the repair or replacement of a defective product, at the option of Salsa Cycles, and is the sole remedy of the warranty. This limited warranty applies only to the original purchaser of the Salsa Cycles product and is not transferable. This warranty applies only to Salsa Cycles products purchased through an authorized dealer or distributor. In no event shall Salsa Cycles be liable for any loss, inconvenience or damage, whether direct, incidental, consequential, or otherwise resulting from breach of any express or implied warranty or condition of merchantability, fitness for a particular purpose, or otherwise with respect to our products except as set forth herein. This warranty gives the consumer specific legal rights, and those rights and other rights may vary from place to place. This warranty does not affect your statutory rights.
TO THE EXTENT NOT PROHIBITED BY LAW, THESE WARRANTIES ARE EXCLUSIVE AND THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
For 2013 and older model bicycles and products, please consult your Owner’s Manual, Salsa Cycles product instructions, or contact Salsa Cycles or your authorized Salsa dealer for the applicable warranty information.
WARRANTY REGISTRATION:
Proof of purchase is required before a warranty claim is processed. Salsa Cycles therefore strongly encourages warranty registration at salsacycles.com. Failure to register will not affect consumer rights under the limited warranty stated above, so long as the consumer can show in a reasonable manner proof of original ownership and the date the Salsa Cycles product was purchased.
If you have any questions contact support@salsacycles.com
“Salsa’s Spearfish eyed our testers from across the room, ready to rip and rocket up climbs. But we were suspicious of the 80-millimeter-rear-travel bike’s intentions. Once we got on trail, though, all preconceived notions regarding Salsa and the Spearfish evaporated as we got to hammering and discovered the true nature of this lean machine.”
-BikeMag.com – January 2015
“Salsa’s Spearfish eyed our testers from across the room, ready to rip and rocket up climbs. But we were suspicious of the 80-millimeter-rear-travel bike’s intentions. Once we got on trail, though, all preconceived notions regarding Salsa and the Spearfish evaporated as we got to hammering and discovered the true nature of this lean machine.”
-BIKE Magazine Video Review - January 2014
“Our test trails for the Spearfish were typical of those found throughout the Midwest—loamy in spots, greasy in spots, cluttered with small rocks and roots, lacking in substantial elevation changes and quasi-trialsy at times—and the Spearfish handled everything superbly.”
-BIKE Magazine – July 2013
“Salsa set out to improve suspension performance, increase frame stiffness and incorporate more progressive geometry, while keeping the intended use—endurance racing —firmly intact.”
-BikeRadar – June 2013
“My Spearfish ride was quite a bit shorter but was long enough to tell the bike is indeed more of a race machine. The suspension was still impressive, but in a smaller package that wants to charge on the flats and climbs more than anything. Shorter chainstays are immediately noticeable and result in a 29er that is fun to flick around and slash corners.”
-BikeRumor – July 2013
“Out on the trail, it was quickly clear to me the Spearfish will nicely fulfill it’s intended mission of helping rider’s endure long hours in the saddle. Though I wouldn’t describe this bike’s suspension as plush, it is responsive when pedaling and offers great traction over roots and rocks. This is a hard-edge tool for covering ground with speed and efficiency, not a cushy trail steed—exactly what Salsa set out to build.”
-Dirt Rag – June 2013
“I got some serious saddle time on the Spearfish XX1, and front the moment I swung my leg over this bike I had an ear-to-ear grin. Some bikes are just perfect for certain people, and the way this Spearfish felt – from the fit to its uncanny ability to accelerate – I knew this bike was tailor made for my riding style.”
-MTBR – June 2013
“Steve and I logged some 25 miles on tight, twisting singletrack, and by the time we looped back to the car, I’d decided that the Spearfish was every bit as capable a race bike as anything on the market.”
-Outside Magazine – August 2013
““…Salsa has really stepped things up. With competent suspension, neat welding and lovely finishes, Salsa has moved into the big league.”
-Singletrack – July 2013