The Stormchaser single speed frameset is designed from the ground-up to take on gravel rides in inclement weather. The lightweight aluminum frame features gravel race geometry similar to Warbird; Class 5™ VRS to absorb road impacts; our all-new sliding Alternator Flat Mount dropouts make single speeding simple, and the included geared dropout plate adds 1x drivetrain compatibility; and extra tire clearance for managing mud. The carbon fiber fork is also prepared for anything—abrasion plates prevent wear from mud-caked tires, Three-Pack mounts add extra storage for water or gear, and internal routing keeps your brake hose and dynamo cable out of the elements. The Stormchaser single speed gravel frameset is a stellar starting point for a bike that performs rain or shine.
We cannot confirm inventory in your vicinity. Please reach out to one of the listed retailers in your area for more information on this model or consider expanding your search area.
|Headset (Upper/Lower)||FSA No.42 ACB|
|Seat Collar||Salsa Lip-Lock 32.0 mm seatpost collar|
|Extras||Alternator Flat Mount Driveside Geared Plate and derailleur hanger included|
|Front Axle||Salsa Deadbolt UL M12 x 120 mm thru-axle|
|Rear Axle||Salsa Deadbolt UL M12 x 167 mm thru-axle|
|Frameset Weight||5lbs 6oz. for size 54.5cm|
|Design Wheel/Tire Sizes||700c x 42 mm|
|Alternate Wheel/Tire Sizes||700c x 32–50 mm; 650b x 47–50 mm|
|Suspension Fork Length (Travel)||N/A|
|Rigid Fork Length||420 mm|
|Fork Offset||51 mm|
|Seatpost Collar||32.0 mm|
|Dropper Compatible (Routing)||Yes (internal)|
|Front Derailleur Clamp||N/A|
|Front Derailleur Type||N/A|
|Bottom Bracket||73 mm BSA, threaded|
|Crankset (Max Ring - Single Speed)||1x crankset, 40t max, Race Face/Easton 51 mm chainline, single speed only|
|Crankset (Max Ring - Geared)||1x crankset only, 38t max, 49 mm MTN chainline, 168 Q-factor min.|
|Front Brake (Rotor)||Flat mount frame standard, 35 mm thickness, 42 mm bolt length (160 mm rotor only)|
|Rear Brake (Rotor)||Flat mount frame standard, 20 mm thickness, 27 mm bolt length (140–160 mm rotor)|
|Rear Spacing||12 x 142 mm TA|
|Rear Axle Size||M12 x 167L, TP = 1.5, TL = 20 mm (NOTE, DOES NOT FIT SALSA DEABOLT W/ LEVER. DEADBOLT UL TOOLED AXLE ONLY)|
|Derailleur Hanger||Hanger 465, QBP# FS2322 (Requires geared Alternator Flat Mount Plate, QBP# FS0719, and Hanger Axle/Stud Kit, QBP# FS1181)|
|Rear Rack Mounts||Yes, universal rack rear compatible. Salsa Post-Lock seat collar required. Salsa Wanderlust Rack recommended.|
|Fender Mounts||Yes, required fender hardware included.|
|Max Tire Size with Fenders||700c x 47 mm|
|Water Bottle Mounts||Frames up to 56 cm: 2 in main triangle. Frames 57.5 cm and larger: 3 in main triangle.|
|Downtube Accessory Mounts||One|
|Top Tube Mounts||Yes, compatible with Salsa EXP Series Top Tube bag.|
|Stem Clamp||28.6 mm|
|Crown Race||Integrated SHIS 40, 36° Angle|
|Front Spacing||12 x 100 mm TA|
|Front Axle||M12 x 120L, TP = 1.5, TL = 12 mm|
|Three-Pack Mounts||One mount per fork leg.|
|Rack Mounts||165 mm Low-rider compatible. Salsa Down Under rack recommended.|
|Recommended Rider Height||142cm–157cm||155cm–165cm||162cm–173cm||170cm–180cm||178cm–188cm||185cm–193cm||190cm–UP|
|A. Toptube Effective||506mm||527mm||545mm||560mm||575mm||590mm||605mm|
|B. Seat Tube Length||390mm||440mm||475mm||510mm||520mm||545mm||570mm|
|C. Headtube Angle||70.0°||70.0°||70.0°||70.0°||70.0°||70.0°||70.0°|
|D. Seat Tube Angle||75.25°||74°||73.0°||73.0°||73°||73.0°||73.1°|
|E. BB Drop||70mm||70mm||70mm||70mm||70mm||70mm||70mm|
|F. Chainstay Length||435–450mm||435–450mm||435–450mm||435–450mm||435–450mm||435–450mm||435–450mm|
|G. Headtube Length||90mm||105mm||125mm||145mm||165mm||185mm||205mm|
|H. Fork Length||420mm||420mm||420mm||420mm||420mm||420mm||420mm|
|J. Fork Offset||51mm||51mm||51mm||51mm||51mm||51mm||51mm|
Measurements based on:
Salsa Cycles Limited Warranty
All Salsa products are warranted against manufacturing defects in materials and workmanship from the date of retail purchase of the product, subject to the limitations detailed below. Every Salsa frame, component, and apparel has a useful product life cycle. The length of that useful product life cycle will vary depending on the construction and the materials of the product, maintenance and care the product receives, and the amount and type of use the product is subjected to over its life. Your bike has an intended level of use as defined by the ASTM Riding Condition Classification Chart. Failure to adhere to the use cases identified in this chart will void your warranty. Save your dated receipt for proof of purchase.
NOTE: All warranty periods below apply to original owner only
Carbon front triangle of suspension frames
Aluminum front triangles of suspension frames
All Salsa forks
All Salsa components
Aluminum chainstays of suspension frames
Aluminum seatstays of suspension frames
Carbon seatstays of suspension frames
All other suspension frame parts (excludes hanger, pivot hardware, bearings)
All frame bags
Salsa Cycles does not guarantee the compatibility of original components with a warranty replacement frame. Salsa Cycles is not responsible for parts or labor required to remove and/or refit and re-adjust the product within the bicycle assembly, including wheel rebuilds.
Salsa Cycles cannot guarantee a color match to the original frame, component, or apparel in the event of a replacement.
This warranty applies to 2014 and newer model bicycles and covers only Salsa Cycles branded product. Any other original part or component shall be covered by the stated warranty of the original manufacturer. Any products not specifically included above are hereby excluded.
This warranty does not cover the following:
Damage due to improper assembly or follow-up maintenance or lack of skill, competence or experience of the user or assemble
Bicycles that were not assembled or serviced by an authorized Salsa Cycles dealer
Products that have been modified, neglected, used in competition, or for commercial purposes such as rental, courier, police, security, etc, misused or abused, involved in accidents or anything other than normal use
Installation of components, parts, or accessories not originally intended for use with or compatible with Salsa frames and components
Salsa Cycles bicycles, frames, components or softgoods purchased from an unauthorized dealer
Salsa Cycles bicycles, frames, components or softgoods purchased from third-party internet sites, including auction websites, and regional trading websites (examples: Amazon, eBay, and Craigslist) are not covered under this warranty, even if you have a receipt
Sandblasting, sanding, grinding, wire brushing, filing, welding, brazing, drilled holes, anodizing, refinishing, powder coating, or chrome plating the bicycle, frame, or component will void the warranty
Internal rust perforation on all steel frames
Wear, scratches, chips and cracks to paint, finish, or coating on all Salsa frames and components
Bent or broken derailleur hangers or Alternator plates
Labor required to remove and/or refit and re-adjust the product within the bicycle assembly, including wheel rebuilds
Damage to carbon fiber caused by any carbon assembly paste
Normal wear and tear
This limited warranty is expressly limited to the repair or replacement of a defective product, at the option of Salsa Cycles, and is the sole remedy of the warranty. This limited warranty applies only to the original purchaser of the Salsa Cycles product and is not transferable. This warranty applies only to Salsa Cycles products purchased through an authorized dealer or distributor. In no event shall Salsa Cycles be liable for any loss, inconvenience or damage, whether direct, incidental, consequential, or otherwise resulting from breach of any express or implied warranty or condition of merchantability, fitness for a particular purpose, or otherwise with respect to our products except as set forth herein. This warranty gives the consumer specific legal rights, and those rights and other rights may vary from place to place. This warranty does not affect your statutory rights.
TO THE EXTENT NOT PROHIBITED BY LAW, THESE WARRANTIES ARE EXCLUSIVE AND THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
For 2013 and older model bicycles and products, please consult your Owner’s Manual, Salsa Cycles product instructions, or contact Salsa Cycles or your authorized Salsa dealer for the applicable warranty information.
Proof of purchase is required before a warranty claim is processed. Salsa Cycles therefore strongly encourages warranty registration at salsacycles.com. Failure to register will not affect consumer rights under the limited warranty stated above, so long as the consumer can show in a reasonable manner proof of original ownership and the date the Salsa Cycles product was purchased.
If you have any questions contact email@example.com