Let Timberjack SLX 29 be your guide to good times on the trail. Find confidence in the 130 mm suspension fork and dropper post, and fun in the short chainstays (adjustable thanks to our Alternator dropout system). The versatility of Timberjack’s cargo mounts and dual wheel size compatibility adds a few dimensions to the riding experience, and Shimano’s SLX groupset equals effortless shifting. Put it all together, and you’ve got a 29” trail hardtail that’s the perfect platform for all of your off-road exploits.
|Fork||Rockshox Recon RL 130 mm travel, 15 x 110 mm|
|Rear Der||Shimano SLX|
|Cassette||Shimano SLX, 10–51t 12-speed|
|Crankset||Shimano MT610, 32t|
|Brakes & Rotors||Shimano MT401, 180 mm front, 160 mm rear rotors|
|Headset||FSA Orbit 1.5E|
|Stem||Salsa Guide 35.0|
|Handlebar||Salsa Guide 35.0 Aluminum|
|Grips||Salsa File Tread Lock-On|
|Seatpost||TranzX JD-YSI05JL, 30 mm Travel Adjustable, XS/SM = 125 mm, MD/LG = 150 mm, XL = 170 mm|
|Saddle||WTB Volt Sport|
|Front Wheel||Shimano MT400 32h 15 x 110 mm hub, WTB ST i29 TCS 2.0 29" rim|
|Rear Wheel||Shimano MT510 32h 12 x 148 mm hub, WTB ST i29 TCS 2.0 29" rim|
|Tires||WTB Trail Boss G2 TCS Light/Fast Rolling 29 x 2.6"|
|Complete Bike Weight||31lb 6oz - Medium|
|Design Wheel/Tire Size||29 x 2.6 max. (at 427 rear center)|
|Alternative Wheel/Tire Size||27.5 x 3.0" max. (at 427mm rear center)|
|Suspension Fork Length (Travel)||511–541mm (100–130mm)|
|Rigid Fork Length||483–502mm|
|Headset-Lower||AL: ZS56, Ti: EC44|
|Seatpost||AL: 30.9mm, Ti: 31.6mm|
|Dropper Compatible (Routing)||Yes|
|Front Derailleur Mount||148mm rear spaced: high direct mount (29mm offset) via 34.9mm clamp Problem Solvers Bracket (FS1328) 142mm rear spaced: high direct mount (26.5mm offset) via 34.9mm clamp Problem Solvers bracket (FS1323)|
|Bottom Bracket||73mm BSA, threaded|
|Crankset (Max Ring)||1x crankset: 32t max. Boost or 30t max.
Non-Boost, 2x crankset: 36/24t max.
Boost and 36/24t Non-Boost
|Rear Brake (Rotor)||51mm I.S., (160–180mm)|
|Rear Spacing||141mm; 148mm compatible (requires: FS8112, FS1373, FS1382), 142/135mm capable w/ Alternator Reduction plates (FS2360)|
|Rear Axle Size||12 x 180L, TP = 1.75, TL = 20|
|Derailleur Hanger||QR = FS1312; TA = FS1373; SS = FS1318; SSTA = FS1375; L Rohloff = FS1371; TA Kit = FS1370|
|Rack Mounts||Yes w/ Alternator Rack System|
|Front Brake (Rotor)||N/A|
|Recommended Rider Height||157cm–168cm||160cm–175cm||173cm–183cm||180cm–191cm||188cm–UP|
|A. Toptube Effective||571mm||591mm||611mm||641mm||671mm|
|B. Seat Tube Length||355.6mm||381.0mm||431.8mm||482.6mm||533.4mm|
|C. Headtube Angle||67.6°||67.6°||67.6°||67.6°||67.6°|
|D. Seat Tube Angle||73.2°||73.2°||73.2°||73.2°||73.2°|
|E. BB Drop||57mm||57mm||57mm||57mm||57mm|
|F. Chainstay Length||420–437mm||420–437mm||420–437mm||420–437mm||420–437mm|
|G. Headtube Length||100mm||100mm||110mm||120mm||135mm|
|H. Fork Length||509mm||509mm||509mm||509mm||509mm|
|J. Fork Offset||51mm||51mm||51mm||51mm||51mm|
Measurements based on:
Salsa Cycles Limited Warranty
All Salsa products are warranted against manufacturing defects in materials and workmanship from the date of retail purchase of the product, subject to the limitations detailed below. Every Salsa frame, component, and apparel has a useful product life cycle. The length of that useful product life cycle will vary depending on the construction and the materials of the product, maintenance and care the product receives, and the amount and type of use the product is subjected to over its life. Your bike has an intended level of use as defined by the ASTM Riding Condition Classification Chart. Failure to adhere to the use cases identified in this chart will void your warranty. Save your dated receipt for proof of purchase.
NOTE: All warranty periods below apply to original owner only
Carbon front triangle of suspension frames
Aluminum front triangles of suspension frames
All Salsa forks
All Salsa components
Aluminum chainstays of suspension frames
Aluminum seatstays of suspension frames
Carbon seatstays of suspension frames
All other suspension frame parts (excludes hanger, pivot hardware, bearings)
All frame bags
Salsa Cycles does not guarantee the compatibility of original components with a warranty replacement frame. Salsa Cycles is not responsible for parts or labor required to remove and/or refit and re-adjust the product within the bicycle assembly, including wheel rebuilds.
Salsa Cycles cannot guarantee a color match to the original frame, component, or apparel in the event of a replacement.
This warranty applies to 2014 and newer model bicycles and covers only Salsa Cycles branded product. Any other original part or component shall be covered by the stated warranty of the original manufacturer. Any products not specifically included above are hereby excluded.
This warranty does not cover the following:
Damage due to improper assembly or follow-up maintenance or lack of skill, competence or experience of the user or assemble
Bicycles that were not assembled or serviced by an authorized Salsa Cycles dealer
Products that have been modified, neglected, used in competition, or for commercial purposes such as rental, courier, police, security, etc, misused or abused, involved in accidents or anything other than normal use
Installation of components, parts, or accessories not originally intended for use with or compatible with Salsa frames and components
Salsa Cycles bicycles, frames, components or softgoods purchased from an unauthorized dealer
Salsa Cycles bicycles, frames, components or softgoods purchased from third-party internet sites, including auction websites, and regional trading websites (examples: Amazon, eBay, and Craigslist) are not covered under this warranty, even if you have a receipt
Sandblasting, sanding, grinding, wire brushing, filing, welding, brazing, drilled holes, anodizing, refinishing, powder coating, or chrome plating the bicycle, frame, or component will void the warranty
Internal rust perforation on all steel frames
Wear, scratches, chips and cracks to paint, finish, or coating on all Salsa frames and components
Bent or broken derailleur hangers or Alternator plates
Labor required to remove and/or refit and re-adjust the product within the bicycle assembly, including wheel rebuilds
Damage to carbon fiber caused by any carbon assembly paste
Normal wear and tear
This limited warranty is expressly limited to the repair or replacement of a defective product, at the option of Salsa Cycles, and is the sole remedy of the warranty. This limited warranty applies only to the original purchaser of the Salsa Cycles product and is not transferable. This warranty applies only to Salsa Cycles products purchased through an authorized dealer or distributor. In no event shall Salsa Cycles be liable for any loss, inconvenience or damage, whether direct, incidental, consequential, or otherwise resulting from breach of any express or implied warranty or condition of merchantability, fitness for a particular purpose, or otherwise with respect to our products except as set forth herein. This warranty gives the consumer specific legal rights, and those rights and other rights may vary from place to place. This warranty does not affect your statutory rights.
TO THE EXTENT NOT PROHIBITED BY LAW, THESE WARRANTIES ARE EXCLUSIVE AND THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
For 2013 and older model bicycles and products, please consult your Owner’s Manual, Salsa Cycles product instructions, or contact Salsa Cycles or your authorized Salsa dealer for the applicable warranty information.
Proof of purchase is required before a warranty claim is processed. Salsa Cycles therefore strongly encourages warranty registration at salsacycles.com. Failure to register will not affect consumer rights under the limited warranty stated above, so long as the consumer can show in a reasonable manner proof of original ownership and the date the Salsa Cycles product was purchased.
If you have any questions contact firstname.lastname@example.org