Achieving gravel greatness takes hard work and tenacity—and a gravel race bike that can hang with you every pedal stroke of the way. For that, there’s the Warbird Carbon GRX 810 Di2. Our comfortable and efficient Class 5™ VRS-equipped high-modulus carbon fiber frameset and Shimano’s refined electronic Di2 shifting ensure that no effort is wasted on the gravel-strewn road to the finish line.
Frameset | |
---|---|
Frame | Warbird Carbon V2 |
Fork | Waxwing Deluxe |
Color | Pink |
Rear Shock | n/a |
Drivetrain | |
---|---|
Front Der | Shimano RX815-F |
Rear Der | Shimano RX815 |
Cassette | Shimano HG800-11, 11–34t |
Chain | Shimano HG701-11 |
Crankset | Shimano RX810-2, 48/31t (RX600, 46/30t with 165mm arms on 49cm size) |
Shifter | Shimano RX815 Di2 |
Brakes & Rotors | Shimano RX810, Hydraulic, RT76 160 mm rotors |
Components | |
---|---|
Headset | Cane Creek 40 |
Stem | Salsa Guide |
Handlebar | Salsa Cowbell Carbon |
Grips | MSW Anti-Slip Gel |
Seatpost | Salsa Guide Carbon |
Saddle | WTB Volt Pro |
Wheels | |
---|---|
Front Wheel | DT Swiss CR 1600, 12 x 100 mm, 700c |
Rear Wheel | DT Swiss CR 1600, 12 x 142 mm, 700c |
Tires | Teravail Cannonball 700c x 42 mm, Durable, Tubeless-Ready |
Weight | |
---|---|
Bike Weight | 19 lbs 15 oz for 54.5 cm |
Component Sizing
Size | 49cm | 52.5cm | 54.5cm | 56cm | 57.5cm | 59cm | 61cm |
---|---|---|---|---|---|---|---|
Stem Length | 70mm | 70mm | 80mm | 90mm | 90mm | 100mm | 110mm |
Crank Length | 165mm | 170mm | 170mm | 172.5mm | 172.5mm | 175mm | 175mm |
Handlebar Width | 38cm | 38cm | 40cm | 42cm | 44cm | 44cm | 46cm |
Seatpost Offset | 18mm | 18mm | 18mm | 18mm | 18mm | 18mm | 18mm |
Max Tire OD | 700c: 716mm 650b: 696mm |
---|---|
Design Wheel/Tire Size | 622 - 32 (700 x 32mm) |
Alternate Wheel/Tire Size | 622 – 32-45 (700c x 32–45mm / 1.2–1.8”) 584 – 47-51 (650b x 47mm–51mm / 1.85–2.0”) |
Suspension Fork Length (Travel) | 427mm axle-to-crown (40mm travel) |
Rigid Fork Length | 405mm |
Fork Offset | 50mm |
Headset-Upper | IS41 |
Headset-Lower | IS52 |
Seatpost | 27.2mm |
Seat Collar | 32.0mm |
Bottom Bracket | BB86 PressFit |
Crankset | 1x: 44t max; 2x: 52/36t max, 46/30t minimum |
Rear Brake (Rotor) | Flat mount 140, 140–160mm, flat mount frame standard 20mm thickness, 27mm bolt length |
Rear Spacing | 142mm |
Rear Axle | M12 x 167L, TP = 1.5, TL = 20mm |
Derailleur Hanger | Hanger 465, QBP# FS2322 |
Fender Mounts | Yes, required fender hardware included |
Rack Mounts | Yes, universal rack rear compatible, Salsa Post-Lock seat collar required, Salsa Wanderlust Rack recommended |
Water Bottle Mounts | Frames up to 54cm: 2 in main triangle, frames 56cm and larger: 3 in main triangle |
Downtube Accessory Mount | Yes, one pair |
Toptube Mounts | Yes, compatible with Salsa Toptube bag |
Stem Clamp | Ø28.6mm |
Crown Race | Integrated SHIS 40, 36° angle |
Front Brake (Rotor) | Flat mount 160, flat mount rear standard, 35mm thickness, 42mm bolt length |
Front Spacing | 100mm |
Front Thru-Axle | M12 x 120L, TP = 1.5, TL = 12mm |
Three-Pack Mounts | One mount per fork leg |
Rack Mounts | 165mm Lowrider compatible, Salsa Down Under rack recommended |
Size | 49cm | 52.5cm | 54.5cm | 56cm | 57.5cm | 59cm | 61cm |
---|---|---|---|---|---|---|---|
Recommended Rider Height | 142cm–157cm | 155cm–165cm | 162cm–173cm | 170cm–180cm | 178–188cm | 185–193 cm | 190cm–UP |
A. Toptube Effective | 499mm | 525mm | 545mm | 560mm | 575mm | 590mm | 610mm |
B. Seat Tube Length | 390.0mm | 440mm | 475mm | 510mm | 520mm | 545mm | 570mm |
C. Headtube Angle | 71.0° | 70.75° | 70.75° | 70.75° | 70.75° | 70.75° | 70.75° |
D. Seat Tube Angle | 75.0° | 74.0° | 73.0° | 73.0° | 73.0° | 73° | 72.5° |
E. BB Drop | 70mm | 70mm | 70mm | 70mm | 70mm | 70mm | 70mm |
F. Chainstay Length | 430mm | 430mm | 430mm | 430mm | 430mm | 430mm | 430mm |
G. Headtube Length | 90mm | 120mm | 140mm | 160mm | 180mm | 200mm | 220mm |
H. Fork Length | 405mm | 405mm | 405mm | 405mm | 405mm | 405mm | 405mm |
J. Fork Offset | 50mm | 50mm | 50mm | 50mm | 50mm | 50mm | 50mm |
K. Wheelbase | 996.14mm | 1011.96mm | 1022.39mm | 1038.21mm | 1054.03mm | 1069.85mm | 1084.54mm |
M. Stack | 517.85mm | 547.09mm | 565.97mm | 584.85mm | 603.73mm | 622.61mm | 641.50mm |
N. Reach | 360.24mm | 368.13mm | 371.97mm | 381.19mm | 390.42mm | 399.65mm | 407.74mm |
P. Standover | 670.20mm | 714.48mm | 744.30mm | 770.11mm | 785.96mm | 808.40mm | 830.55mm |
Measurements based on:
Salsa Cycles Limited Warranty
All Salsa products are warranted against manufacturing defects in materials and workmanship from the date of retail purchase of the product, subject to the limitations detailed below. Every Salsa frame, component, and apparel has a useful product life cycle. The length of that useful product life cycle will vary depending on the construction and the materials of the product, maintenance and care the product receives, and the amount and type of use the product is subjected to over its life. Your bike has an intended level of use as defined by the ASTM Riding Condition Classification Chart. Failure to adhere to the use cases identified in this chart will void your warranty. Save your dated receipt for proof of purchase.
NOTE: All warranty periods below apply to original owner only
Five-Year Warranty
Steel frames
Titanium frames
Carbon frames
Carbon front triangle of suspension frames
Three-Year Warranty
Aluminum frames
Aluminum front triangles of suspension frames
All Salsa forks
All Salsa components
Two-Year Warranty
Aluminum chainstays of suspension frames
Aluminum seatstays of suspension frames
Carbon seatstays of suspension frames
All other suspension frame parts (excludes hanger, pivot hardware, bearings)
One-Year Warranty
All apparel
All frame bags
Salsa Cycles does not guarantee the compatibility of original components with a warranty replacement frame. Salsa Cycles is not responsible for parts or labor required to remove and/or refit and re-adjust the product within the bicycle assembly, including wheel rebuilds.
Salsa Cycles cannot guarantee a color match to the original frame, component, or apparel in the event of a replacement.
This warranty applies to 2014 and newer model bicycles and covers only Salsa Cycles branded product. Any other original part or component shall be covered by the stated warranty of the original manufacturer. Any products not specifically included above are hereby excluded.
This warranty does not cover the following:
Damage due to improper assembly or follow-up maintenance or lack of skill, competence or experience of the user or assemble
Bicycles that were not assembled or serviced by an authorized Salsa Cycles dealer
Products that have been modified, neglected, used in competition, or for commercial purposes such as rental, courier, police, security, etc, misused or abused, involved in accidents or anything other than normal use
Installation of components, parts, or accessories not originally intended for use with or compatible with Salsa frames and components
Salsa Cycles bicycles, frames, components or softgoods purchased from an unauthorized dealer
Salsa Cycles bicycles, frames, components or softgoods purchased from third-party internet sites, including auction websites, and regional trading websites (examples: Amazon, eBay, and Craigslist) are not covered under this warranty, even if you have a receipt
Sandblasting, sanding, grinding, wire brushing, filing, welding, brazing, drilled holes, anodizing, refinishing, powder coating, or chrome plating the bicycle, frame, or component will void the warranty
Internal rust perforation on all steel frames
Wear, scratches, chips and cracks to paint, finish, or coating on all Salsa frames and components
Bent or broken derailleur hangers or Alternator plates
Labor required to remove and/or refit and re-adjust the product within the bicycle assembly, including wheel rebuilds
Damage to carbon fiber caused by any carbon assembly paste
Normal wear and tear
Legal Disclaimer
This limited warranty is expressly limited to the repair or replacement of a defective product, at the option of Salsa Cycles, and is the sole remedy of the warranty. This limited warranty applies only to the original purchaser of the Salsa Cycles product and is not transferable. This warranty applies only to Salsa Cycles products purchased through an authorized dealer or distributor. In no event shall Salsa Cycles be liable for any loss, inconvenience or damage, whether direct, incidental, consequential, or otherwise resulting from breach of any express or implied warranty or condition of merchantability, fitness for a particular purpose, or otherwise with respect to our products except as set forth herein. This warranty gives the consumer specific legal rights, and those rights and other rights may vary from place to place. This warranty does not affect your statutory rights.
TO THE EXTENT NOT PROHIBITED BY LAW, THESE WARRANTIES ARE EXCLUSIVE AND THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
For 2013 and older model bicycles and products, please consult your Owner’s Manual, Salsa Cycles product instructions, or contact Salsa Cycles or your authorized Salsa dealer for the applicable warranty information.
WARRANTY REGISTRATION:
Proof of purchase is required before a warranty claim is processed. Salsa Cycles therefore strongly encourages warranty registration at salsacycles.com. Failure to register will not affect consumer rights under the limited warranty stated above, so long as the consumer can show in a reasonable manner proof of original ownership and the date the Salsa Cycles product was purchased.
If you have any questions contact support@salsacycles.com